Description
»Working principle of heatless adsorption dryer
When compressed air enters, it flows through tower A through the valve, and the moisture in the compressed air will be adsorbed by the adsorbent, thus achieving the drying effect. A part of the compressed air enters tower B through the regeneration air volume regulating valve, and the moisture adsorbed by the adsorbent is taken away through the muffler. The whole system cycle takes 10 minutes. The cycle sequence is as follows: when tower A is dehumidifying for 5 minutes, tower B will regenerate for 4.5 minutes and continue to pressurize for 0.5 minutes. In this way, the two towers work alternately, and the regeneration air volume only needs 12%.
»Product features of heatless adsorption dryer
Humanized design: scientific and reasonable structural design, novel appearance, beautiful appearance, long-term high efficiency, stable performance, easy operation, maintenance and maintenance, and easy installation (no foundation).
The working principle of pressure swing adsorption is adopted. The cycle can be programmed according to the working conditions, and the factory standard is set to 10min. A variety of control modes can be reasonably selected according to customer needs, such as: PLC control, remote monitoring, dew point display and signal transmission function.
The inner wall of the cylinder is professionally rust-proofed and will not rust for 10 years.
Flexible and stable pneumatic valve, reliable operation and long service life.
The adsorbent filling volume is extremely sufficient, and the large-capacity desiccant bed ensures that the air and the desiccant have sufficient contact time, so that the desiccant can fully absorb moisture and achieve a stable outlet dew point. Ensure the stability of the outlet air dew point and dehydration effect.
The high-quality muffler effectively reduces product noise, has pressure protection function, and improves product safety.
Maintaining a suitable air flow rate in the adsorption cylinder can ensure that the compressed air is fully in contact with the adsorbent and prevent the adsorbent from moving and pulverizing.
The product is uniquely designed with small air flow pulses, stable air pressure without fluctuations, greatly reduced adsorbent breakage, and less dust in the outlet gas.
Technical Parameters
